Skip to content
MakerLogic
Learning by design.
  • Home
  • Join us
  • Blog
  • CUBEx8
  • ezPixel
  • ezMatrix
  • Contact Us
  • About Us

Tag: FPGA

Layout time!

March 20, 2018 makerlogicwebmaster

OldDogBlog post 13 In this post I will discuss how I decided on circuit board size and placement of the…

Continue Reading →

Filed under: BGA, FPGA, JTAG, KiCad, Layout, MAX10, PCB, placement, UBGA169

Schematic time!

December 10, 2017 makerlogicwebmaster 2 Comments

OldDogBlog post 12 The previous blogs got me to a point where I’m confident I can do this project with…

Continue Reading →

Filed under: artwork, FPGA, Layout, maker, MakerLogic, PCB, schematic

“Plane” and simple.

November 13, 2017 makerlogicwebmaster

OldDogBlog Post 11. In this post I’ll talk a bit about how I did the escape routing for the MAX10…

Continue Reading →

Filed under: BGA, escape routing, FPGA, ground plane, Layout, maker, MakerLogic, MAX10, power plane, UBGA169

Geometry? I thought I was done with that in high school.

November 6, 2017 makerlogicwebmaster

OldDogBlog post 10. In this post I’ll discuss the decisions that are made while getting ready for component placement and…

Continue Reading →

Filed under: BGA, FPGA, geometry, Layout, PCB, trace and space, UBGA169

OrCad, KiCad, Eagle, Lizard, Spock

October 31, 2017 makerlogicwebmaster

OldDogBlog post 9. In this post I’ll discuss the free design tools I used for schematic capture and PCB layout.…

Continue Reading →

Filed under: BGA, Eagle, FPGA, Intel, KiCad, Layout, MAX10, OrCad, PCB

The Architect Sketch.

October 24, 2017 makerlogicwebmaster

OldDogBlog post 8. OK, that one showed my age as it is an obscure Monty Python TV show reference. This…

Continue Reading →

Filed under: CP2102, FPGA, FTDI, Intel, MAX10, SiLabs, Silicon Labs, WS2812B

A Series of Epic Fails…

October 23, 2017 makerlogicwebmaster

OldDogBlog post 7. In the last post I made the decision to use an Intel MAX10M08 FPGA for the ezPixel…

Continue Reading →

Filed under: 10M08, Altera, ezPixel, FPGA, Intel, maker, MakerLogic

In the balance.

October 10, 2017 makerlogicwebmaster

OldDogBlog post #6. In the last post I described the basic functional requirements for ezPixel along with the timing requirements…

Continue Reading →

Filed under: 10M08, ezPixel, FPGA, MakerLogic, MAX10, Spartan6

Prototype time.

October 5, 2017 makerlogicwebmaster

OldDogBlog post 5. In order to determine how big an FPGA to use, I have to have some idea how…

Continue Reading →

Filed under: Altera, FPGA, Intel, MAX10, Spartan 6, WS2812, WS2812B, Xilinx

Blinded by the light.

October 4, 2017 makerlogicwebmaster

OldDogBlog post 4. At the end of blog post #3 I suggested that before deciding on a specific FPGA vendor…

Continue Reading →

Filed under: Digi-Key, FPGA, Hackaday, MAKE, maker, MakerLogic, MAX10, WS2812, WS2812B

Post navigation

Page 1 of 2
1 2 Next →
  • Home
  • Join us
  • Blog
  • CUBEx8
  • ezPixel
  • ezMatrix
  • Contact Us
  • About Us
Copyright © 2025 MakerLogic — Escapade WordPress theme by GoDaddy