OldDogBlog post 15 In this post I will discuss producing the first prototype boards that I planned on using at…
Layout II OldDogBlog post 14 In this post I will discuss adding the power and ground planes and routing the…
OldDogBlog post 13 In this post I will discuss how I decided on circuit board size and placement of the…
OldDogBlog post 12 The previous blogs got me to a point where I’m confident I can do this project with…
OldDogBlog Post 11. In this post I’ll talk a bit about how I did the escape routing for the MAX10…
OldDogBlog post 10. In this post I’ll discuss the decisions that are made while getting ready for component placement and…
OldDogBlog post 9. In this post I’ll discuss the free design tools I used for schematic capture and PCB layout.…
OldDogBlog post 8. OK, that one showed my age as it is an obscure Monty Python TV show reference. This…
OldDogBlog post 7. In the last post I made the decision to use an Intel MAX10M08 FPGA for the ezPixel…
OldDogBlog post #6. In the last post I described the basic functional requirements for ezPixel along with the timing requirements…