Skip to content

MakerLogic

Learning by design.
  • Home
  • ezPixel
  • ezMatrix
  • Blog
  • Contact Us

Author: makerlogicwebmaster

Time to fab some boards.

April 19, 2018 makerlogicwebmaster Leave a comment

OldDogBlog post 15 In this post I will discuss producing the first prototype boards that I planned on using at…

Continue Reading →

Layout Time II

April 13, 2018 makerlogicwebmaster Leave a comment

Layout II OldDogBlog post 14 In this post I will discuss adding the power and ground planes and routing the…

Continue Reading →

Layout time!

March 20, 2018 makerlogicwebmaster Leave a comment

OldDogBlog post 13 In this post I will discuss how I decided on circuit board size and placement of the…

Continue Reading →

Filed under: BGA, FPGA, JTAG, KiCad, Layout, MAX10, PCB, placement, UBGA169

Schematic time!

December 10, 2017 makerlogicwebmaster 2d Comments

OldDogBlog post 12 The previous blogs got me to a point where I’m confident I can do this project with…

Continue Reading →

Filed under: artwork, FPGA, Layout, maker, MakerLogic, PCB, schematic

“Plane” and simple.

November 13, 2017 makerlogicwebmaster Leave a comment

OldDogBlog Post 11. In this post I’ll talk a bit about how I did the escape routing for the MAX10…

Continue Reading →

Filed under: BGA, escape routing, FPGA, ground plane, Layout, maker, MakerLogic, MAX10, power plane, UBGA169

Geometry? I thought I was done with that in high school.

November 6, 2017 makerlogicwebmaster Leave a comment

OldDogBlog post 10. In this post I’ll discuss the decisions that are made while getting ready for component placement and…

Continue Reading →

Filed under: BGA, FPGA, geometry, Layout, PCB, trace and space, UBGA169

OrCad, KiCad, Eagle, Lizard, Spock

October 31, 2017 makerlogicwebmaster Leave a comment

OldDogBlog post 9. In this post I’ll discuss the free design tools I used for schematic capture and PCB layout.…

Continue Reading →

Filed under: BGA, Eagle, FPGA, Intel, KiCad, Layout, MAX10, OrCad, PCB

The Architect Sketch.

October 24, 2017 makerlogicwebmaster Leave a comment

OldDogBlog post 8. OK, that one showed my age as it is an obscure Monty Python TV show reference. This…

Continue Reading →

Filed under: CP2102, FPGA, FTDI, Intel, MAX10, SiLabs, Silicon Labs, WS2812B

A Series of Epic Fails…

October 23, 2017 makerlogicwebmaster Leave a comment

OldDogBlog post 7. In the last post I made the decision to use an Intel MAX10M08 FPGA for the ezPixel…

Continue Reading →

Filed under: 10M08, Altera, ezPixel, FPGA, Intel, maker, MakerLogic

In the balance.

October 10, 2017 makerlogicwebmaster Leave a comment

OldDogBlog post #6. In the last post I described the basic functional requirements for ezPixel along with the timing requirements…

Continue Reading →

Filed under: 10M08, ezPixel, FPGA, MakerLogic, MAX10, Spartan6

Post navigation

Page 1 of 2
1 2 Next →
  • Home
  • ezPixel
  • ezMatrix
  • Blog
  • Contact Us
Copyright © 2018 MakerLogic — Escapade WordPress theme by GoDaddy