OldDogBlog post 13 In this post I will discuss how I decided on circuit board size and placement of the…
OldDogBlog Post 11. In this post I’ll talk a bit about how I did the escape routing for the MAX10…
OldDogBlog post 9. In this post I’ll discuss the free design tools I used for schematic capture and PCB layout.…
OldDogBlog post 8. OK, that one showed my age as it is an obscure Monty Python TV show reference. This…
OldDogBlog post #6. In the last post I described the basic functional requirements for ezPixel along with the timing requirements…
OldDogBlog post 5. In order to determine how big an FPGA to use, I have to have some idea how…
OldDogBlog post 4. At the end of blog post #3 I suggested that before deciding on a specific FPGA vendor…