OldDogBlog post 13 In this post I will discuss how I decided on circuit board size and placement of the…
OldDogBlog post 12 The previous blogs got me to a point where I’m confident I can do this project with…
OldDogBlog Post 11. In this post I’ll talk a bit about how I did the escape routing for the MAX10…
OldDogBlog post 10. In this post I’ll discuss the decisions that are made while getting ready for component placement and…
OldDogBlog post 9. In this post I’ll discuss the free design tools I used for schematic capture and PCB layout.…